<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>830数字技术 - 电子电路</title>
    <link>https://www.dt830.com/forum-44-1.html</link>
    <description>Latest 20 threads of 电子电路</description>
    <copyright>Copyright(C) 830数字技术</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 12 May 2026 18:48:07 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.dt830.com/static/image/common/logo_88_31.gif</url>
      <title>830数字技术</title>
      <link>https://www.dt830.com/</link>
    </image>
    <item>
      <title>同分异构的  DC–DC</title>
      <link>https://www.dt830.com/thread-8581-1-1.html</link>
      <description><![CDATA[电路布局就这，
给你七个锚点，元件自己填，
能搗鼓出的  DC–DC  长哪样？！]]></description>
      <category>电子电路</category>
      <author>LhUpBJT</author>
      <pubDate>Mon, 11 May 2026 16:15:42 +0000</pubDate>
    </item>
    <item>
      <title>反馈与偏置</title>
      <link>https://www.dt830.com/thread-8550-1-1.html</link>
      <description><![CDATA[这R1，该名为Rʙ还是Rғ？ 
R1透过R2跟Vcc相通，这是个上拉电阻。
只要是上拉，就可让三极管正偏，偏置，就是Rʙ的存在意义。 
如果把R1接于集电极，则Iʙ会受Uce的牵制，效果就是电压并联负反馈，把这R1叫做Rғ也没毛病。 ...]]></description>
      <category>电子电路</category>
      <author>吳昱昊</author>
      <pubDate>Tue, 14 Apr 2026 00:03:03 +0000</pubDate>
    </item>
    <item>
      <title>自举电路 如是我观</title>
      <link>https://www.dt830.com/thread-8518-1-1.html</link>
      <description><![CDATA[自举的效果，四个字：减负增幅，
减负，对任何类型的讯号源都有效果，
增幅，电流源型讯号源才可以，电压源型讯号源不行，

自举为甚么可以减负，因为，输出通过自举电容C3把偏置网络「堵住」，给讯号源「止血」，
C3 的作用除了「止血」，还有「固本」，固那门子的本 ...]]></description>
      <category>电子电路</category>
      <author>LhUpBJT</author>
      <pubDate>Sun, 22 Mar 2026 14:55:57 +0000</pubDate>
    </item>
    <item>
      <title>OB2263电源芯片代换281H07</title>
      <link>https://www.dt830.com/thread-8489-1-1.html</link>
      <description><![CDATA[绿联CD132快充电源适配器无输出，经查为电源芯片281H07故障。找不到芯片资料，而手里只有OB2263，看二者外观与相似，尝试代换一下：





电源适配器无输出，但电源芯片281H07供电5脚有6.8V左右的电压


局部照片


下面是OB2263的典型应用电路图，红色标记为281H07的实 ...]]></description>
      <category>电子电路</category>
      <author>kyhwhb</author>
      <pubDate>Wed, 25 Feb 2026 02:24:50 +0000</pubDate>
    </item>
    <item>
      <title>測電流的數字電表 紅黑探頭接反 會燒壞嗎? 有出現負的數據</title>
      <link>https://www.dt830.com/thread-8485-1-1.html</link>
      <description><![CDATA[前輩好

  我的數字電表 是dt -830b 在量測電瓶充電電流
    紅黑探頭接反 會燒壞嗎? 有出現負的數據 ?]]></description>
      <category>电子电路</category>
      <author>qoo</author>
      <pubDate>Sat, 21 Feb 2026 04:42:27 +0000</pubDate>
    </item>
    <item>
      <title>东拉西扯侃电阻</title>
      <link>https://www.dt830.com/thread-8481-1-1.html</link>
      <description><![CDATA[本帖，只讨论基本属性，寄生与分布参数绝不考虑。
电阻的成因是，①分子对电子的束缚、②晶格对流动电子的窒碍 (就像人在森林里，树不犯人但人跑得不痛快)，
半导体可充当电阻，但不适合用于电阻，用于电阻的材料，应该是不受电压及任何外因所影响，这种材料应该叫做  ...]]></description>
      <category>电子电路</category>
      <author>LhUpBJT</author>
      <pubDate>Thu, 05 Feb 2026 16:09:01 +0000</pubDate>
    </item>
    <item>
      <title>好难得 电流「源」</title>
      <link>https://www.dt830.com/thread-8477-1-1.html</link>
      <description><![CDATA[①电子电路的 基准，到底有啥用？！
②论原理，好难得电流「源」跟一般的电力调控器有何差异？！]]></description>
      <category>电子电路</category>
      <author>LhUpBJT</author>
      <pubDate>Fri, 30 Jan 2026 17:12:16 +0000</pubDate>
    </item>
    <item>
      <title>請教xl6019升壓模塊接12v 12w的摩托車燈泡 為何電壓會掉到3v?</title>
      <link>https://www.dt830.com/thread-8467-1-1.html</link>
      <description><![CDATA[前輩好    視頻快轉至2:17     www youtube com watch?v=cRpwCPshTN0
xl6019預先調整輸出12v後請教xl6019升壓模塊接12v 12w的摩托車燈泡 為何電壓會掉到3v? 理論上應該維持12v輸出? 視頻 快轉至3:25    輸出電流測量為365mA
 ...]]></description>
      <category>电子电路</category>
      <author>qoo</author>
      <pubDate>Thu, 08 Jan 2026 02:00:25 +0000</pubDate>
    </item>
    <item>
      <title>测量xl6009 输出电流方法</title>
      <link>https://www.dt830.com/thread-8457-1-1.html</link>
      <description><![CDATA[前辈好
手上有一个xl6009 boost模块 打算 升压至14.7v 去充铅酸电瓶
想要测量电瓶被输入的充电电流 也就是 xl6009 boost模块的输出电流  需要用三用电表串联小灯泡或是小风扇测量 还是有更好的方法测量 xl6009 boost模块的输出电流? 感谢
 ...]]></description>
      <category>电子电路</category>
      <author>qoo</author>
      <pubDate>Thu, 18 Dec 2025 01:22:39 +0000</pubDate>
    </item>
    <item>
      <title>万能PCB板的绝缘阻值</title>
      <link>https://www.dt830.com/thread-8429-1-1.html</link>
      <description><![CDATA[有这种情况没有，电路原理正确，零件选择合格，虽然采用了万能电路板但走线合理，就是实验结果不正确，这时不妨考虑一下所用的电路板绝缘阻值，
看下图
电路板正面
电路板反面
绝缘阻值
电路板正面
电路板反面
电路板阻值
电路板正面
电路板反面
电路板阻 ...]]></description>
      <category>电子电路</category>
      <author>fslichong</author>
      <pubDate>Wed, 05 Nov 2025 14:53:48 +0000</pubDate>
    </item>
    <item>
      <title>依据实物绘制的雅乐思电磁炉电路图</title>
      <link>https://www.dt830.com/thread-8412-1-1.html</link>
      <description><![CDATA[鄙人依据实物绘制的雅乐思电磁炉电路图]]></description>
      <category>电子电路</category>
      <author>xajunxm</author>
      <pubDate>Fri, 17 Oct 2025 04:43:24 +0000</pubDate>
    </item>
    <item>
      <title>手搓绕线机</title>
      <link>https://www.dt830.com/thread-8381-1-1.html</link>
      <description><![CDATA[那段时间迷上了蜂房，听起蜂房收台好，好奇心太大，成品机又不便宜，手搓一个，刚开始没绕成，后来还行，上次测试蜂房没有磁圈绕的2.5豪亨的电感好。]]></description>
      <category>电子电路</category>
      <author>栓子678</author>
      <pubDate>Tue, 30 Sep 2025 12:39:46 +0000</pubDate>
    </item>
    <item>
      <title>电源类型讲解</title>
      <link>https://www.dt830.com/thread-8347-1-1.html</link>
      <description><![CDATA[电源类型讲解]]></description>
      <category>电子电路</category>
      <author>练习两坤半</author>
      <pubDate>Tue, 23 Sep 2025 07:39:13 +0000</pubDate>
    </item>
    <item>
      <title>LPO是什么？一篇文章带你搞懂LPO测试</title>
      <link>https://www.dt830.com/thread-8335-1-1.html</link>
      <description><![CDATA[在数字经济与 AI 技术飞速发展的今天，数据中心作为算力枢纽正面临着高性能与低功耗的双重诉求。传统光互联方案虽支撑了数据中心的规模化发展，但在功耗、成本与延迟方面的瓶颈日益凸显。在此背景下，线性可插拔光学器件（Linear Pluggable Optics , LPO）凭借其创新性 ...]]></description>
      <category>电子电路</category>
      <author>43545</author>
      <pubDate>Thu, 18 Sep 2025 06:09:22 +0000</pubDate>
    </item>
    <item>
      <title>咨询：这两个是什么元件？标准型号？（已解决）</title>
      <link>https://www.dt830.com/thread-8296-1-1.html</link>
      <description><![CDATA[这两个是什么元件？具体型号？（已解决）

一边是三个引脚，一边是一个引脚。
一个丝印是“8A  718\&quot;；另一个丝印是”9A 714“。



经过通电测量，确认8A  718是78L05；9A 714是79L05。
感谢各位坛友的热情回答。



 ...]]></description>
      <category>电子电路</category>
      <author>xajunxm</author>
      <pubDate>Tue, 09 Sep 2025 15:20:16 +0000</pubDate>
    </item>
    <item>
      <title>LM317可调</title>
      <link>https://www.dt830.com/thread-8214-1-1.html</link>
      <description><![CDATA[LM317作为一款经典的可调稳压芯片，因为其便宜的价格，良好的性能在很多电路中有所应用。


由于输出端比调节端的电压，一直高大约1.25伏左右。且工作电流至少在1.5ma根据欧姆定律计算可得r1取值不得超过830欧姆
计算公式如下Vout=Vref(1+r1/r2)
min1.25*（1+0/220）
=1 ...]]></description>
      <category>电子电路</category>
      <author>练习两坤半</author>
      <pubDate>Wed, 13 Aug 2025 07:35:16 +0000</pubDate>
    </item>
    <item>
      <title>另类震荡电路</title>
      <link>https://www.dt830.com/thread-7917-1-1.html</link>
      <description><![CDATA[我是门外汉，脑洞不大，
这电路，是我想出来的，或许我不是第一个。]]></description>
      <category>电子电路</category>
      <author>LhUpBJT</author>
      <pubDate>Thu, 10 Aug 2023 15:04:10 +0000</pubDate>
    </item>
    <item>
      <title>可控硅的原理</title>
      <link>https://www.dt830.com/thread-7916-1-1.html</link>
      <description><![CDATA[可控硅的本质，就如我的网名，闩锁双极晶体管。 
跟BJT一样，可控硅也是三端有源器件，其实可理解为 P外延NPN管，
P外延层跟N集电区必然成结，无法做成欧姆接触，但此新增PN结可产生 电导调制效应，对集电区导电能力的改善比 N+ 外延更给力。 
在NPN管的 Ib 中，空穴 ...]]></description>
      <category>电子电路</category>
      <author>LhUpBJT</author>
      <pubDate>Thu, 10 Aug 2023 14:50:52 +0000</pubDate>
    </item>
    <item>
      <title>STC12C5A56s2单片机P4口设置问题</title>
      <link>https://www.dt830.com/thread-7879-1-1.html</link>
      <description><![CDATA[请教单片机P4口设置问题，现在是PWM输出在P1.3，P1.4口，怎样改到P4口。看说明是改变特殊功能寄存器，如图



寄存器的位置是否按图中红线对应吧，如果是的话，头文件里sfr  AUXR1 = 0xC2；应该是PCA_4位置已经置 1 了，但PWM信号在缺省值位置P1.3口输出。请教大师AUXR1 ...]]></description>
      <category>电子电路</category>
      <author>wgsd</author>
      <pubDate>Mon, 17 Jul 2023 05:44:12 +0000</pubDate>
    </item>
    <item>
      <title>从定性到定量</title>
      <link>https://www.dt830.com/thread-7731-1-1.html</link>
      <description><![CDATA[我们的学习从感性到定性到定量到逐步提升的过程，
开关电源肯定有振荡器肯定有波形，这就是常规知识让我们感观认知出来的，我们可以用万用表对其各部分的电压进行测试得到定量的数据，但是依旧不知道它在怎么震荡，震荡出来了一个什么波形，频率怎样。这些参数其实在维 ...]]></description>
      <category>电子电路</category>
      <author>fslichong</author>
      <pubDate>Wed, 12 Apr 2023 13:22:36 +0000</pubDate>
    </item>
  </channel>
</rss>